Help Center
Earn 3% back
Lite & Cool Surgical Mask, 1 Box of 50 (Masks) - Img 1

Key Features

Built to the spec
clinicians trust.

01

ASTM F2100 Barrier Protection

Three fluid-resistance levels match clinical risk: Level 1 (low), Level 2 (moderate), Level 3 (high-fluid surgical exposure).

02

High Filtration Efficiency

Meets ≥95% BFE (bacterial) and PFE (particulate) filtration while preserving breathability across a full shift.

03

Hypoallergenic Earloops or Ties

Soft elastic earloops distribute pressure evenly; tie-back variants are standard for extended procedural wear.

04

Adjustable Nose Bar

Malleable aluminum or double-strip nose bridges seal fit over the bridge of the nose to reduce fog and leakage.

Clinical Use / Surgical & Procedure Masks

How clinicians
use this product.

Surgical and procedure masks provide fluid-resistant barrier protection against droplets and splashes during patient care. ASTM F2100 levels distinguish low, moderate, and high fluid-resistance for different clinical environments.

Indications

Clinical use cases.

  • Droplet precautions during routine patient care
  • Surgical and procedural asepsis at the sterile field
  • Source control during coughing, sneezing, or aerosolizing events
  • Low-to-moderate fluid exposure (injections, delivery, non-surgical procedures)
  • Universal masking during respiratory illness seasons

Application Technique

Step by step.

01

/ 05

Hand hygiene.

Clean hands before handling the mask. Inspect for defects or contamination before donning.

02

/ 05

Orient correctly.

Colored side out; metal nose bar at the top. The mask should fully cover nose and mouth to below the chin.

03

/ 05

Secure earloops or ties.

Pull earloops over the ears without twisting, or tie the upper straps over the crown and the lower straps at the nape.

04

/ 05

Mold to the nose.

Press the nose bar along the bridge of the nose for a close fit. No gaps at the cheeks or chin.

05

/ 05

Doff by the straps.

Remove by the earloops or ties only — do not touch the front of the mask. Discard immediately; perform hand hygiene.

Contraindications & Cautions

When not to use.

  • Not equivalent to an N95 respirator for airborne pathogens (TB, measles, COVID-19 aerosols)
  • Single-use only — do not wash, decontaminate, or reuse
  • Level 1 masks are not appropriate for surgical procedures with fluid exposure — select Level 2 or 3
  • Do not wear a damp, soiled, or damaged mask; replace immediately

Typical Care Settings

Where it's used.

  • All Healthcare Settings
  • Operating Rooms and Procedure Suites
  • Emergency Department
  • Outpatient Clinics
  • Dental Procedures

Clinical use information is provided for reference only. Always follow facility protocols, manufacturer instructions for use (IFU), and evidence-based practice guidelines. Consult the treating clinician before use.

Regulatory & Quality

FDA
Class II (21 CFR 878.4040)
Latex
Latex-free (modern surgical masks)
Sterility
Non-sterile
Biocompatibility
ISO 10993 skin-contact tested

Standards & Certifications

  • FDA 510(k) Cleared
  • ASTM F2100 (Level 1 / 2 / 3)
  • BFE ≥95%
  • PFE ≥95%

How It Compares

Aspen Surgical Products vs. the alternatives.

A spec-by-spec comparison with the most common alternatives in the surgical & procedure masks category. Clinical interchangeability varies — always verify with your care team or facility protocol.

Spec

This product

Lite & Cool Surgical Mask, 1 Box of 50

O&M Halyard Inc

The Lite One® Surgical Mask, 1 Case of 300

McKesson Brand

McKesson Classic Style Light & Cool Surgical Mask, Blue, 1 Box of 50

Aspen Surgical Products

Comfort-Cool™ Surgical Mask, 1 Box of 50

ASTM Level——Level 1—
BFE——≥98%—
PFE——≥98%—
Fluid Resistance——80 mmHg—
Nose BarAdjustableAdjustableAdjustableAdjustable

Comparison is provided for reference only. Brand names and trademarks belong to their respective owners. Specific SKUs may differ from category averages shown above.

Product Family

Also available in.

Other sizes, pack counts, and variants of the same product line.

Pairs With

Complete the set.

Products commonly used alongside this one. Bundle them into a single order.

About the Brand

Aspen Surgical Products.

Trusted manufacturer

An established medical products manufacturer supplying clinical teams with quality healthcare supplies.

Shop All Aspen Surgical ProductsOur Partner Brands

FAQ / Surgical & Procedure Masks

Frequently asked.

Answers to the questions clinical buyers and care teams ask most about this product category.

What's the difference between ASTM F2100 Level 1, 2, and 3?

Level 1 resists fluid pressure of 80 mmHg (low-risk exams, short procedures). Level 2 resists 120 mmHg (moderate fluid exposure). Level 3 resists 160 mmHg (orthopedic and trauma surgeries with arterial-pressure fluid risk). All three levels filter ≥95% bacterial filtration efficiency.

Are earloop and tie-back masks functionally different?

Earloops are faster to don and doff but apply ear pressure during long procedures. Tie-back masks distribute pressure across the crown and nape for extended wear and are standard in operating rooms and long procedural cases.

Is this a surgical mask or a respirator?

This is a surgical/procedure mask — a loose-fitting fluid barrier that filters droplets. It is not an N95 respirator and does not seal against the face. For airborne precautions, use a NIOSH-approved respirator that has been fit tested.

Can masks be sterilized and reused?

No. Surgical and procedure masks are single-use. Filter and fluid-barrier performance degrades after wear, and reprocessing (heat, UV, chemical) compromises the filter layer.

Why does this mask fog my glasses?

Fogging is caused by exhaled air escaping at the nose bridge. Press the nose bar firmly along the bridge of the nose and ensure the mask sits flush against the cheeks. Persistent fogging usually means the mask is too loose or the nose bar was not formed.

Keep Reading

More on surgical & procedure masks.

Related

You might also need.