Hospital Supply HQ

Delta Ultra Lite 1000 Homecare Full Elec Bed Package-Drive

$1,068.76USD

$1,314.65USD

In Stock
Ships from our western US warehouses
Fast Shipping
Same-day processing before 2pm PST
30-Day Returns
Hassle-free on eligible orders
HSA / FSA
Eligible for most medical accounts

At a Glance

Brand: Hospital Supply HQ
Category: Beds, Parts & Accessories
MFR#: MSHQ-1802CP
GTIN: 822383211770
Weight: 0.005 lb

About this product

Bed with Full Length Side Rails & 80 Inner Spring Mattress *The Delta 1000 is truly universal because the headboards and footboards are completely interchangeable with Drive's and most other manufacturers bed ends old and new *The transition box mounted on the foot section is key to interchangeability *The transition box allows you to change the rotation of the high-low shaft *Headboard is taller than footboard to better fit home decor *The wood grain panels are break and scratch resistant *Once installed the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations *Labels and color-coded springs assure accurate installation of side rails for patient safety *Unique motor is completely self-contained to reduce weight and noise *9.5 to 23.5 deck height *Easy to set up *Top mounted Hi/Lo crank accessability *Weight capacity: 450 lbs *Height adjustable motor comes pre-installed on the foot section *Caster easily moves from standard to low bed position *The motor assembly can be installed and removed with patient in bed *The motor is UL approved *In the event of a power failure a 9 volt battery located in the motor can lower the head and foot sections nine times *New and improved hand pendant has large easy to use controls *Bed ships in two cartons *Channel frame construction provides superior strength and reduced weight *Zinc coated spring deck *Limited 5 year warranty on motor and hand control lifetime warranty on welds and frame 1 year warranty on all other parts and components

Key Features

Built to the spec
clinicians trust.

01

Pressure Redistribution

Foam, gel, and alternating-air overlays redistribute pressure under at-risk body prominences — a core element of pressure-injury prevention bundles.

02

Positioning Precision

Bolsters, wedges, and leg elevators hold anatomical positions for surgical recovery, respiratory support, edema control, and contracture prevention.

03

Clinical-Grade Sheets

Fitted hospital sheets, stretched-fit pillowcases, and contoured bedding survive institutional laundering and fit hospital mattresses (typically 36 × 84 inches).

04

Washable and Replaceable Covers

Removable, launderable covers on overlays and positioning aids allow infection-control cleaning between patients without replacing the core foam.

Clinical Use / Bedding, Mattresses & Positioning

How clinicians
use this product.

Hospital bedding and patient-positioning equipment — beds and bed parts, bolster rolls, wedges, leg elevators, mattress overlays, fitted sheets, and pressure-redistribution surfaces. Selection is driven by patient risk (Braden score), body habitus, and care-setting protocols.

Indications

Clinical use cases.

Pressure-injury prevention in immobile and at-risk patients (Braden ≤18)
Post-operative positioning (supine with leg elevation, semi-Fowler, prone)
Respiratory support (head-of-bed elevation to prevent VAP)
Edema and circulation management (leg and arm elevation)
Contracture prevention in long-term-care and neuro rehab

Application Technique

Step by step.

01

/ 05

Assess Braden score.

Patients with Braden score ≤18 or other risk factors (immobility, incontinence, malnutrition) need active pressure-redistribution surfaces, not just foam pads.

02

/ 05

Position per clinical need.

Head-of-bed ≥30° for VAP prevention; leg elevation above heart for edema; prone or lateral for respiratory support. Reposition at least every 2 hours.

03

/ 05

Select surface match.

Foam overlays for low-risk patients; alternating-air or low-air-loss for moderate-high risk; bariatric-rated surfaces for patients over standard weight limits.

04

/ 05

Inspect and launder.

Inspect bedding daily for soiling or wear. Launder sheets per facility protocol; wipe overlays and positioning aids between patients with healthcare disinfectant.

05

/ 05

Document repositioning and skin assessment.

Log turn schedule, skin assessment (every shift), and any Stage 1+ pressure changes. Adjust surface and frequency based on assessment.

Contraindications & Cautions

When not to use.

Pressure-redistribution surfaces are not a substitute for scheduled repositioning
Bolsters and wedges must not be positioned where they compress vascular or nerve structures
Air mattresses must be monitored — deflation is a silent failure that negates all pressure-relief benefit
Do not exceed the mattress or overlay weight capacity (bariatric patients require bariatric-rated surfaces)

Typical Care Settings

Where it's used.

Acute Care and Med-Surg
ICU / CCU
Long-Term Care and Skilled Nursing
Home Health
Inpatient Rehabilitation

Clinical use information is provided for reference only. Always follow facility protocols, manufacturer instructions for use (IFU), and evidence-based practice guidelines. Consult the treating clinician before use.

Regulatory & Quality

FDA: Class I / II (21 CFR 880.5170 medical mattress; 890.3475 positioning device)
Latex: Latex-free
Sterility: Non-sterile
Biocompatibility: Skin-contact safe

Standards & Certifications

FDA 510(k) Cleared (active pressure-redistribution surfaces)
ASTM F1858 (pressure-redistribution performance)
FR-rated covers per state regulation

How It Compares

Hospital Supply HQ vs. the alternatives.

A spec-by-spec comparison with the most common alternatives in the bedding, mattresses & positioning category. Clinical interchangeability varies — always verify with your care team or facility protocol.

Spec	This product Delta Ultra Lite 1000 Homecare Full Elec Bed Package-Drive	Hospital Supply HQ Delta Ultra Lite 1000 Homecare Full Electric Bed Only-Drive	Hospital Supply HQ Delta Ultra-Lite 1000 Bed Pkg Semi-Elec w/Mattress & Rails	Hospital Supply HQ Delta Ultra-Lite 1000 Bed Only Semi-Electric
Cover Material	—	—	Vinyl	Vinyl
Sizing	L	L	L	L

Spec

This product

Delta Ultra Lite 1000 Homecare Full Elec Bed Package-Drive

Hospital Supply HQ

Delta Ultra Lite 1000 Homecare Full Electric Bed Only-Drive

Hospital Supply HQ

Delta Ultra-Lite 1000 Bed Pkg Semi-Elec w/Mattress & Rails

Hospital Supply HQ

Delta Ultra-Lite 1000 Bed Only Semi-Electric

Cover Material

—

Vinyl

Sizing

L

Comparison is provided for reference only. Brand names and trademarks belong to their respective owners. Specific SKUs may differ from category averages shown above.

Pairs With

Complete the set.

Products commonly used alongside this one. Bundle them into a single order.

Specifications

Product details.

Product

Type: Beds, Parts & Accessories
Vendor: Hospital Supply HQ
SKU: MSHQ-1802CP

Pricing

Price: $1,068.76USD
Compare-at price: $1,314.65USD

Inventory

Barcode: 822383211770
Product weight: 0.005 lb

Collections

Beds, Parts & Accessories

Frequently asked.

Answers to the questions clinical buyers and care teams ask most about this product category.

What size are hospital fitted sheets?

Standard hospital mattresses are 36 × 84 inches. Fitted sheets are sized for this plus mattress depth (typically 6–8 inches). Bariatric beds (42 or 48 inches wide) require bariatric-sized sheets.

When is a mattress overlay enough, and when do I need a full air mattress?

Foam or gel overlays suit low-to-moderate-risk patients (Braden 15–18). High-risk patients (Braden ≤14, existing pressure injuries, or prolonged immobility) typically need alternating-air or low-air-loss full mattresses — or a powered replacement mattress.

Are these mattress overlays reusable between patients?

Yes, with proper cleaning. Wipe the nylon or vinyl cover with a healthcare-grade disinfectant between patients. Remove and launder the cover if it's washable. Replace if visibly worn or contaminated.

What's the difference between a bolster, a wedge, and a roll?

Bolsters are cylindrical for side-lying support and between-knees comfort. Wedges are angular for head-of-bed or body-side elevation. Leg/heel rolls are smaller and positioned to offload specific pressure points.

Do these support bariatric patients?

Check the weight capacity. Standard overlays rate 250–350 lbs; bariatric-rated surfaces support 500–1000+ lbs. Always match the weight rating to the patient with a clinical safety margin.

Keep Reading

Delta Ultra Lite 1000 Homecare Full Elec Bed Package-Drive